DIG – 1 1/2” In-Line Valve w/ Flow Control & DC Latching Solenoid – 305DC-150
1 1/2″ Inline DC Valve for use with 720A, 740A, 760A and LEIT-1 controllers
DIG’s 305DC-150 series plastic inline globe valves with a 6-12 VDC, two-way magnetic latching solenoid operate with DIG’s battery operated controllers and LEIT. The globe valves use an encapsulated, watertight, two-way magnetic latching solenoid that requires minimal power to operate. The 305DC-150 are heavy-duty control valves constructed of weather-resistant, glass-reinforced nylon and a stainless steel spring to provide superior hydraulic performance with balanced opening and closing at a pressure rate of up to 150 PSI.
Specifications
- Type: Globe valve with two-way magnetic latching solenoid
- Operating pressure: 10 to 150 PSI, (.7 to 10.5 bar)
- 1 1/2″ NPT female inlet and outlet
- Operating flow range: 20 to 132 GPM (4.5 to 30 m3h)
- Solenoid: 6 -12 VDC, two-way magnetic latching, normally closed, bidirectional pulse
- Voltage rate: 6 -12 VDC
- Coil Resistance: 4.7Ω +/- 0.3
- Pulse Width: minimum 10 mSec
- Operation mode:
- Red + and white – latch to open
- Red – and white + released to closed
- Control orifice: 0.65 +/- 0.0002 (1.7 mm)
- Lead wires: 18” (45 cm) UL 1015, AWG 16, 300V – red and white wires
- Temperature range: up to 150 Fahrenheit (0-65 C)
Features
- Constructed of glass-reinforced nylon with a stainless steel spring; non-corrosive materials
- High flow with low pressure loss
- Normally closed
- Easy inline maintenance
- Smooth valve opening and closing prevents pressure surge hazards
- Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water
- Flow control handle for water flow adjustment and manual shutoff
- Manual internal bleed override via the solenoid
Dimensions
- Valve dimension: 1 1/2″: 7.12″ H x 6.12″ L x 5.75″ W, (18 cm H x 16 cm L x 14.5 cm W)
- Solenoid dimension top: 3.1″ (7.9 cm) L X 1.18″ (3.0 cm) D
- Solenoid dimension bottom: 3.1″ (7.9 cm) L x 1.18″ D (3.0 cm)
- Valve solenoid thread housing: 3/4”-20 UNES-2A
- Adapter thread: 11/16”-12 UN female thread X male ¾”-20male thread
- Solenoid thread: 11/16”-12 UN
- Material:
- Valve body and cover: Glass reinforced nylon
- Diaphragm: Nylon fabric reinforced polyisoprene (NR)
- Metal parts and screws: Stainless Steel 303 and 430F
- Solenoid body: Glass reinforced nylon
- Solenoid plunger rubber cap: EPDM 80
